Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Corpus Christi Homeowners
A chimney that pulls away from the roofline, drips into the firebox during a hard rain, or smells of creosote in the warm months is telling you something structural is loose, cracked, or missing. That is the problem we solve. Starling Chimney Sweep handles the whole repair list for Corpus Christi homes – caps, crowns, flashing, liners, and masonry – and we check the inside of the flue with a camera before we recommend a thing. Our technicians have up to 9 years of experience, and they’re trained on DuraFlex liner systems and HeatShield resurfacing. Call (888) 869-3130. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cap Installation
Chimney Cap Installation is the fitting of a screened metal or stainless cover over the flue opening to keep rain, birds, and debris out of the chimney. You need one on almost any Corpus Christi chimney that doesn’t already have a proper cap – an open flue is an invitation for starlings and squirrels to nest, and a nest is both a fire risk and an expensive blockage to clear. We measure the flue and the crown, then set a cap that fits the actual opening rather than a universal size that rattles. Most single-flue cap installations in Corpus Christi run about $150-$400 depending on cap style and how many flues you have. We work with Copperfield caps and Famco components because they hold up to heat and weather better than the box-store tops.
Stainless and Multi-Flue Caps
Stainless caps last longer and resist rust better than painted steel, which matters in a climate that stays hot and humid most of the year. For homes with two or three flues, we build a single multi-flue cap that covers the whole crown with one footprint and one set of fasteners.
Animal Guards and Spark Screens
A cap without a screen still lets birds and squirrels through. We fit stainless mesh sized to the flue so it blocks wildlife and sparks while letting smoke and gases leave freely.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement
Chimney Cap Replacement is swapping a damaged or missing cap for a new one, and it’s usually needed when the old cap is rusted through, bent, or sitting crooked after wind or a limb knocked it loose. A failing cap lets water straight into the flue, and once water gets in, the damage moves down into the liner and the masonry. We pull the old cap, inspect the crown underneath for cracks the old cap was hiding, and install a properly sized replacement. Chimney cap replacement in Corpus Christi typically runs $150-$400, with larger or multi-flue jobs toward the top of that range. The written estimate sets the final price, and we don’t recommend a replacement if a repair will hold.
When a Repair Beats a Swap
A loose cap with good metal and snapping fasteners is a fastener-and-seal job, not a full replacement. We tighten or replace the hardware and re-seal the edges before suggesting a new cap at all.
Match the Cap to the Flue
An oversized cap lets wind-driven rain in at the edges; an undersized one restricts draft. We size to the actual flue and crown dimensions so the cap does its job without choking the fire.
Chimney Liner Installation
Chimney Liner Installation is the fitting of a new flue liner inside the chimney to contain combustion gases and protect the masonry from heat. It’s needed when the existing clay tile liner is cracked, spalling, or missing in sections – a cracked liner allows combustion gases into living spaces, including carbon monoxide. This is the repair we take most seriously, and it’s one where we show you the camera footage so you see the crack yourself before any money is discussed. We install DuraFlex stainless liner systems sized to the appliance, whether that’s an open wood fireplace, a gas insert, or a wood stove. Liner installation in Corpus Christi generally runs $1,800-$4,500 depending on liner length, diameter, and whether insulation is needed. The written estimate is the final word before we start.
Relining Around a Wood Insert
A wood insert needs its own correctly sized liner rather than dumping into an old oversized flue, which can cool the smoke and cause backdrafts. We measure the appliance collar and run a continuous liner to it.
When Resurfacing Comes First
If the flue is intact but the interior is pitted and rough, HeatShield resurfacing can sometimes restore it instead of a full reline. We assess which option fits your flue and explain why.
Chimney Flashing Repair
Chimney Flashing Repair is fixing or replacing the metal seal where the chimney meets the roof, the spot most roof leaks actually start. You need it when water stains show on the ceiling near the chimney, the flashing is pulling away from the masonry, or the sealant has dried and cracked. We remove the old flashing, rework the step and counter-flashing, and seal the joints so runoff goes around the chimney instead of behind it. Chimney flashing repair in Corpus Christi typically runs $300-$800 depending on roof pitch and how much of the flashing has to be rebuilt. We handle the chimney side of the seal and keep the work to chimney scope, which is the part we know.
Roof Pitch and the Seal
Steeper roofs push more water past a weak flashing joint, so the step flashing has to be stepped correctly into the shingles. A flat smear of sealant is not a repair; it’s a short delay.
Reading the Water Trail
Water often shows up on the ceiling well away from where it entered. We trace the path from above the roofline before we quote, because the obvious stain is rarely the whole story.
Chimney Crown Repair
Chimney Crown Repair is fixing the concrete top of the chimney, the sloped crown that sheds water away from the flue. It’s needed when the crown is cracked, crumbling, or holding water in a puddle, because a bad crown lets moisture seep down into the masonry and the liner. We clean out the old deteriorated material, reform the slope so water runs off, and seal the surface. Chimney crown repair in Corpus Christi usually runs $350-$900 depending on crown size and how much has to be rebuilt. A crown is small, but it’s the roof of your whole chimney, and a cracked one is the most common path for water damage we find on the inside of a flue.
Sealing Hairline Cracks
Fine cracks can often be sealed with a flexible crown coating that moves with the concrete instead of splitting again. We check the crack width and depth before choosing the approach.
Rebuilding a Failed Crown
When the crown is broken into pieces or has lost its slope entirely, we pour a new one rather than patching over a surface that will fail again. That’s a chimney repair, still within our scope.
Chimney Repair Companies
Chimney Repair Companies vary widely in what they actually do, and in Corpus Christi the difference usually shows up in two places: whether the inspection is on camera and whether the quote is written. A repair company worth hiring photographs the inside of the flue, explains the findings in plain terms, and puts a flat price in writing before any work starts. We do all three. Our technicians have up to 9 years of experience and work only in chimney and venting services, so every job is our core business rather than a side category. Depending on the repair, work through a company like ours in Corpus Christi generally falls in the $150-$4,500 range, with the written estimate setting the final price. We’re happy to look at another company’s quote and tell you what it’s asking for.
What a Fair Quote Includes
A real quote names the problem, the part or material used, and the price as one flat number. If a quote is a vague range with an inspection fee attached, ask what the inspection actually found.
Red Flags to Watch For
Be wary of anyone who quotes a full reline before showing you the inside of the flue. Nothing should be recommended without camera evidence you can see for yourself.
Chimney Masonry Repair
Chimney Masonry Repair is fixing the brickwork and mortar on the chimney stack itself, the joints and bricks above the roofline that take the most weather. You need it when mortar joints are washed out, bricks are loose or spalling, or the stack is leaning. We repoint the joints, replace damaged brick, and rebuild sections that have gone too far to patch. Chimney masonry repair in Corpus Christi typically runs $600-$3,000 depending on how much of the stack is involved and how high the work reaches. Masonry above the roofline is height work, and it’s not a DIY job; a fall from a chimney stack is a serious injury, so we keep that work with trained technicians using proper access and staging.
Repointing vs. Rebuilding
Repointing replaces the worn mortar between sound bricks, which is the cheaper fix when the brick itself is still good. Rebuilding is for sections where the brick has failed too. We tell you plainly which one your chimney needs.
Reading the Brickwork
Spalling brick face, crumbling mortar, and a whitish bloom on the surface all point to moisture working its way in. Catching it early keeps a repoint from turning into a rebuild.
Brands We Service
We work with DuraFlex liner systems because a stainless liner is only as reliable as its construction, and DuraFlex holds up to continuous heat and to the sweepings that come with years of wood burning. We also work with HeatShield chimney resurfacing, which lets us restore a deteriorating flue interior in qualifying chimneys without a full liner replacement – it seals hairline cracks so your flue handles heat the way it was designed to. We know where these systems wear and where the weak points show up over time.
We also service Gelco and Olympia Chimney components for caps and related parts, and we work with Famco venting products and Copperfield chimney supplies when a repair calls for those. We’re not a dealer for any of them; we use these materials because they’re what the trade relies on and what we’re trained to install correctly. Whether you have DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, Copperfield, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Water in the firebox or a ceiling stain. Both point to a flashing or crown failure letting water into the structure. It usually gets worse with each storm, so it’s worth a look before it spreads.
- A strong creosote smell in warm weather. Creosote that has built up in the flue can smell worse as temperatures rise. That’s a sign the flue needs attention before it becomes a fire risk.
- Cracked or missing mortar on the stack. Washed-out joints and loose bricks mean the masonry is taking on water. Catch them early and it’s a repoint; wait and it can become a rebuild.
- A damaged or missing cap. An open flue lets in rain, birds, and debris. A bird’s nest blocking the flue can force smoke and gases back into the house.
- Smoke rolling back into the room. Backdraft can come from a blocked flue, a liner problem, or a sizing issue. It’s the one sign worth a call before you light another fire.
Our Process, Step by Step
- 1
Book the visit. You call (888) 869-3130 and we schedule a repair assessment. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
- 2
Inspect with a camera. We run a camera down the flue and look at the crown, cap, flashing, and masonry from the roof. You see what we see.
- 3
Write the estimate. We explain what’s wrong, what it takes to fix it, and give you a flat written price for the job. Estimates are free.
- 4
Do the work. The repair happens with the professional-grade materials the job calls for, from DuraFlex liners to HeatShield resurfacing to Copperfield caps.
- 5
Show the result. When the work is done, we show you the finished repair and a photo report so you know exactly what changed.
How Much Does Chimney Repair Cost in Corpus Christi?
Chimney repair in Corpus Christi typically runs from about $150 for a cap installation up to roughly $4,500 for a full liner installation, depending on what the chimney needs. A typical cap installation runs $150-$400, flashing repair runs $300-$800, crown repair runs $350-$900, and masonry repair runs $600-$3,000 depending on how much of the stack is involved. Liner installation, the biggest job on the list, generally runs $1,800-$4,500 depending on length, diameter, and insulation.
What pushes a price up is scope, not salesmanship: how high the work reaches, whether the crown has to be rebuilt or just sealed, how much masonry has gone bad, and whether the flue needs a full liner or can be resurfaced. The way to avoid overpaying is to insist on camera evidence and a written flat price before work starts. Nothing in our estimate is a guess about what you “probably” need – we recommend only what the camera shows, and we tell you plainly when a repair can safely wait.
Our estimate is free, and everything we quote is included in that written price. If another company has handed you a four-figure quote for liner or masonry work, we’re glad to inspect and give you a second look before you spend it. Call (888) 869-3130 for an exact quote – estimates are free.
Our Service Area Near Corpus Christi
We serve homeowners across the Corpus Christi area and out along the surrounding towns. If you’re in Portland, Gregory, Taft, or Taft Southwest, we can get to you. East toward the water we cover Ingleside, Aransas Pass, and Port Aransas, and up the coast to Rockport and Fulton. If you’re not sure whether your address is in range, call and ask. You can start with Corpus Christi, and we’ll point you to the right page for your town.
Serving Corpus Christi, TX – Our Local Coverage Area
We serve Corpus Christi and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Repair in Corpus Christi
Chimney repair is fixing the parts of the chimney that are damaged or failing – the cap, crown, flashing, liner, and masonry – so the chimney vents smoke and gases safely and keeps water out. It’s different from a sweep, which cleans the flue; repair addresses the structure itself. We check with a camera before recommending anything, so you know what’s actually wrong. Call (888) 869-3130 for an exact quote – estimates are free.
Most chimney repairs take a few hours to a day, depending on the job. A cap or flashing repair is usually a short visit, while a liner installation or masonry rebuild can take longer. We tell you the expected timeline in your written estimate so you can plan around it. Call (888) 869-3130 to book an assessment.
Most chimney repairs in Corpus Christi fall between about $150 and $4,500, depending on the work. Caps and flashing sit at the lower end, liner installation at the higher end, and crowns and masonry in between. The written estimate sets the final price, and our estimate is free. Call (888) 869-3130 for an exact quote – estimates are free.
Yes – we install and service DuraFlex stainless liner systems, and we’re trained on them. We also work with HeatShield resurfacing, Gelco, Olympia Chimney, Famco, and Copperfield components. If your chimney has a DuraFlex liner that needs attention or replacement, we can assess it on camera. Call (888) 869-3130 to schedule.
Same-day repair is possible when the schedule allows. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (888) 869-3130 to check availability.
We stand behind the repairs we do and discuss the warranty terms for your specific job before work starts. Materials from brands like DuraFlex and HeatShield come with their own manufacturer terms. Ask us about it on the estimate call and we’ll spell out exactly what’s covered. Call (888) 869-3130 with questions.
Clear the area around the fireplace and make sure we can reach the roof safely. If you have pets, keep them away from the work area while we’re on site. Have any prior repair records or paperwork ready if you have it – it helps us understand the chimney’s history. Call (888) 869-3130 to confirm your appointment.
Schedule Your Chimney Repair Service in Corpus Christi Today
A chimney repair done right protects your home from water, fire, and carbon monoxide – and it starts with a camera inspection and a flat written price. At Starling Chimney Sweep, we handle caps, crowns, flashing, liners, and masonry, and we tell you plainly when a repair can wait. Call (888) 869-3130 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Starling Chimney Sweep.