Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Fulton, TX
Chimney repair in Fulton, TX looks different from what most people picture when they hear the phrase. This small coastal-fishing community on Aransas Bay has few wood-burning fireplaces and almost no creosote-heavy chimneys; what it does have is gas fireplaces, gas log sets, and vented range and water-heater flues in older single-story cottages and elevated bay-front rentals, and those need inspection and repair far more than they need sweeping. Salt-laden onshore air off Aransas Bay rusts caps, dampers, and metal flue pipe faster than the mild winters ever stress them, so the work here is diagnosing corrosion, blockage, and venting faults before they become a safety problem. Call (888) 869-3130 to book an inspection.
Why Fulton Homes Are Different
The housing stock in Fulton tells most of the story. Older single-story coastal cottages and small ranches dominate, many built with simple masonry fireplaces that have since been converted to gas logs, or fitted with direct-vent gas appliances that vent through a wall or roof. Alongside those sit a growing number of elevated bay-front vacation and rental homes built on pilings, where the venting runs are newer but the salt air still finds every exposed metal surface.
Subtropical Gulf Coast humidity and salt-laden onshore air off Aransas Bay accelerate rust on chimney caps, dampers, and metal flue pipe. Combine that with short, mild winters that leave fireplaces idle for months, and the off-season becomes a window for pest, moisture, and nest build-up. A call that starts as a “chimney cleaning” in Fulton often turns out to be a rusted-out cap or a bird or insect nest blocking a gas flue. Creosote is rarely the issue here; corrosion and blockage are. Homes in the 78358 area face the same salt-air exposure wherever they sit near the bay.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Fulton Services
Fulton homeowners call us most often about two things: getting the chimney swept and inspected before heating season, and clearing the dryer vent that nobody has looked at in years.
Chimney Sweep in Fulton
A sweep visit in Fulton is really an inspection with cleaning built in. We run a camera down the flue, check the cap, damper, and firebox, and clear whatever the idle months have collected: nests, insects, leaf debris, and the moisture-driven rust scale that builds on metal flue pipe near the bay. Gas log sets and gas fireplaces get their venting checked for proper draft, since a blocked gas flue is a carbon monoxide concern, not just a performance one. For a focused visit on the cleaning side, see chimney sweep in Fulton.
Dryer Vent Cleaning in Fulton
Dryer vents in coastal homes collect lint and, over time, the same humid grit that settles on everything near the water. A clogged vent makes a dryer run hot and long, and the NFPA identifies dryers as a leading cause of residential fires. In Fulton’s rental homes on pilings, the vent run is often longer than the owner realizes, which is exactly where blockages hide. We clear the full run and confirm airflow at the exterior hood. Book dryer vent cleaning in Fulton.
Chimney Repair in Fulton
Chimney repair in Fulton centers on corrosion and venting integrity rather than masonry rebuilds. The older coastal cottages here were built with simple masonry fireplaces later converted to gas logs, and the bay-front rentals on pilings carry newer venting that still takes a beating from salt air. Our Chimney Repair work addresses the failures this climate actually produces: rusted caps, failing dampers, cracked crowns, deteriorated flue interiors, and metal flue pipe that has thinned from years of humid, salty onshore air. We work with professional-grade materials including HeatShield, DuraFlex, Gelco, and Copperfield because the repair has to hold up to the same conditions that caused the problem.
Chimney Cap Replacement
Signs you need it
You’ll see rust streaks, a cap that has pulled loose in coastal wind, or water and birds getting into the flue because the mesh or top plate has corroded through.
What it costs in Fulton
Chimney cap replacement in Fulton typically runs $150 to $600, depending on the cap style and how much of the old mounting has to be rebuilt.
How we do it
We remove the corroded cap, inspect and clear the flue top, seal the new cap to the crown, and confirm the mesh and fit so birds and rain stay out.
Chimney Liner Installation
Signs you need it
A cracked or deteriorated flue liner allows combustion gases into living spaces, which is why a camera inspection that shows gaps, spalling, or heat damage means the liner needs attention before the appliance is used again.
What it costs in Fulton
Chimney liner installation in Fulton generally falls between $1,800 and $4,500, depending on liner length, material, and whether the flue needs prep work first.
How we do it
We size the liner to the appliance, prep and clean the existing flue, install a DuraFlex liner with proper insulation and connections, and verify draft before we close up.
What Chimney Repair Costs in Fulton
| Item | Typical range in Fulton |
|---|---|
| Chimney cap replacement | $150 – $600 |
| Chimney crown repair | $300 – $1,200 |
| Chimney liner installation | $1,800 – $4,500 |
Does salt air really damage a chimney in Fulton?
Yes. Salt-laden onshore air off Aransas Bay accelerates rust on caps, dampers, and metal flue pipe, and those parts fail faster here than inland. An inspection catches corrosion before it spreads. Call (888) 869-3130 for a free estimate.
Can a gas fireplace flue need repair instead of sweeping?
Often, yes. Gas fireplaces and log sets in Fulton collect nests, insects, and rust scale rather than creosote, and a blocked gas flue is a carbon monoxide risk. Repair or clearing is usually the right call. Estimates are free.
Brands We Service in Fulton
We work with professional-grade materials: DuraFlex liner systems, HeatShield resurfacing, Gelco, and Copperfield chimney supplies. Naming them matters because these are the components the industry relies on, and we source and install to that standard. Turnaround on repair materials varies by part, so we confirm timing with your written estimate. See our brands when you want the full picture.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Fulton, TX
| Service | Typical range in Fulton |
|---|---|
| Chimney sweeping and inspection | $150 – $350 |
| Chimney cap installation | $150 – $600 |
| Chimney cap replacement | $150 – $600 |
| Chimney crown repair | $300 – $1,200 |
| Chimney flashing repair | $300 – $900 |
| Chimney liner installation | $1,800 – $4,500 |
| Dryer vent cleaning | $100 – $250 |
In Fulton, price climbs with corrosion depth: a rusted cap is a quick fix, but a liner that has thinned from years of salt air and moisture is a bigger job. We set the price per job in a written estimate before any work starts, so the number you agree to is the number you pay. Estimates are free.
Neighborhoods We Serve in Fulton
We cover chimney and venting work across Fulton, from the older single-story cottages inland from the bay to the elevated rentals along the waterfront. Salt-air exposure and idle fireplaces are the recurring issues wherever we go, whether it’s a converted gas-log fireplace or a direct-vent appliance. If you’re unsure whether your home falls in the area, call and we’ll confirm. Dispatch is available Sunday through Friday, 7am to 7pm.
- Bay-front pilings homes and vacation rentals
- Older coastal cottages near the 78358 core
- Inland small ranches and single-story homes
Service Area – Cities Near Fulton
Our work extends across the surrounding coastal communities. If you’re just outside Fulton, we also cover Rockport, TX, Aransas Pass, TX, Ingleside, TX, and Gregory, TX. The salt-air and venting concerns we handle in Fulton apply throughout the bay area, so the inspection and repair approach stays the same. Call (888) 869-3130 to check scheduling near you.
Serving Fulton, TX – Our Local Coverage Area
We serve Fulton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Fulton
Yes. We cover Fulton and the nearby coastal communities, from bay-front rentals to inland cottages. Call (888) 869-3130 with your address and we’ll confirm coverage and book your free estimate.
It depends on the work and your property. Structural changes and some installations may require a permit from the city, and an HOA could add its own rules. Ask your city’s building department and check with your HOA before scheduling repair so nothing is held up.
Scheduling depends on the season and demand. We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm, and we’ll give you the next available opening when you call. Reach us at (888) 869-3130.
Whether your Fulton home has a converted gas-log fireplace, a direct-vent appliance, or a dryer vent that hasn’t been touched in years, the first step is a straightforward inspection. Call (888) 869-3130 for a free estimate. We answer 24/7 with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fulton Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Javier Mendoza"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Robert Sullivan"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Eric Walsh